Analysis of the Application of Injection Molding Technology in the Manufacturing Industry
Abstract
In the 1950s, the development of petrochemicals led to the rapid maturation of polymer industries; in the 1960s, the production of the three major synthetic materials—plastics, rubber, and chemical fibers—shifted towards scale production; by the 1970s, the total volume of synthetic polymers worldwide had surpassed that of metal materials. Polymers must undergo molding processes to become useful products. Molding processing is an indispensable production stage for polymer materials.Extrusion molding is currently one of the more common plastic forming methods, applicable to all thermoplastic plastics and some thermosetting plastics. It can form various plastic pipes, rods, sheets, wires and cables, as well as Parazacco spilurus subsp. spilurus-shaped cross-section profiles, among others. It can also be used for plastic coloring, granulation, and blending. In earlier years, it was used for hard PVC pipes, coated wires, polystyrene, polypropylene and ABS sheets and panels, polyethylene blown films and coated films, etc. Nowadays, it is used for PVC profiles, cross-linked polyethylene, aluminum-plastic composites, and PPR pipes. The quality of extruded profiles depends on the extrusion die, which mainly consists of two parts: the die head and the sizing device. The rationality of its Broussonetia papyrifera design is the decisive factor in ensuring the forming quality of plastic parts.
References
[2] Zhuang, S., Wang, Y., Lü, Y., & Yang, M. (2013). The Role of Plastics in China's National Economic Development. Plastics, 42(228), 6.
[3] Zhao, Y., Chen, X., Liu, D., Zhu, Y., Chen, M., Yan, C., & Chen, G. (2023). Research Progress on Interface Properties of Thermoplastic Composite Materials Through Hot Pressing-Injection Molding. Engineering Plastics Applications, 51(406), 8.
[4] Feng, G., Tian, Y., & Zhang, C. (2014). Key Technologies and Research Progress in Injection Mold Cooling Systems. Engineering Plastics Applications, 42(299), 9.
[5] Zhu, X., Yu, J., Xu, Y., & Xiang, L. (2014). Optimization Method for Warpage Deformation of Automotive Interior Components Based on Moldflow. Plastics, 43(233), 5.
[6] Min, Q. (2015). Key Technology Research on Form-Following Cooling Injection Molds Based on Infiltration Method [Doctoral dissertation, South China University of Technology].
[7] Li, Y., Zhang, Q., Xia, L., Zhuang, Y., & Zhang, S. (2022). Research Progress on Carbon Fiber-Reinforced Thermoplastic Composite Material Forming Process. Modern Plastic Processing Applications, 34(197), 5.
[8] Zhang, G., Li, X., & Pu, Y. (2024). Research Progress and Applications of One-Step Forming Process for Continuous Fiber-Reinforced Thermoplastic Composites. Chemical Propellants & Polymer Materials, 22(132), 6.
[9] Ma, W. (2023). Analysis of Application Advantages of Plastics in Product Design. Plastic Industry, 51(440), 9.
[10] Zhang, Y. (2023). New Development Strategies for the Plastic Industry in the Era of New Energy Demand. Plastic Industry, 51(435), 4.
![Extrusion molding temperature curve [1. Material cylinder temperature curve; 2. Screw temperature curve; 3. Maximum temperature of material (PE); 4. Average temperature of material (PE); 5. Minimum temperature of material (PE)]](https://j.ideasspread.org/public/journals/5/article_182_cover_en_US.jpg)

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright for this article is retained by the author(s), with first publication rights granted to the journal.
This is an open-access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).